• 3S2P 11.1V 6000mAh Li-ion battery pack
  • 3S2P 11.1V 6000mAh Li-ion battery pack
  • 3S2P 11.1V 6000mAh Li-ion battery pack
  • 3.7V(1S)-11.1V(3S) - 3S2P 11.1V 6000mAh Li-ion battery pack
  • 3.7V(1S)-11.1V(3S) - 3S2P 11.1V 6000mAh Li-ion battery pack
  • 3.7V(1S)-11.1V(3S) - 3S2P 11.1V 6000mAh Li-ion battery pack

3S2P 11.1V 6000mAh Li-ion battery pack

3.7V(1S)-11.1V(3S)

Model: AY-LI3S2P-18650VTC6
Voltage: 11.1V
Capacity: 6000mAh
Size (can be customized): φ57*H68mm
Cell Model: Sony 18650VTC6 3000mah

  • Description
  • Get quote
Sender email add: RE: 3S2P 11.1V 6000mAh Li-ion battery pack
  • 3.7V(1S)-11.1V(3S)

    AY-LI3S2P-18650VTC6

    3S2P 11.1V 6000mAh Li-ion battery pack 
    Technical Parameters
    Battery pack * 11.1V 6000mAh Li(NiCoMn)O2 Battery is made by 6pcs of
    Li(NiCoMn)O2 18650 3000mAh cells
    * In 3S2P configuration
    * Wrap with heavy duty PVC
    Charge Information *Charge voltage: 12.6V±0.05V (4.2V/cell)
    *Charge method: CC/CV (Constant-current and-Voltage with Limited current)
    *Standard charging time: 3000mA/ 3hours, 6000mA/1.5hours
    (Battery capacity÷charging current×1.5 )
    *Charge current: 3A 
    Dishcharge Information * Maximum discharging current: 3A 
    * Continuous discharge current: 3A 
    * Discharge cut-off voltage: 7.5V (2.5V/cell)
    Protection Information * Protected by one PCM:
    * PCM is installed in the battery pack to balance charging and protect battery
    * Must wait min of 30 minutes afrer battery is fully charged to allow the PCM to perform balance function on all the cells within the pack
    * Maximal continuous charging current: 3A
    * Maximal continuous discharging current: 3A
    * Over-charge& over-discharge detection voltage: 4.25V/2.5V
    * Over-current detection: 10A±3A
    Short-circuit Protection Exterior short circuit Automatic recovery
    Intermal resistance / Cycle life ≤200mΩ / ≥500
    Operating Temperature *Standard Charge: 0~+40℃ / *Standard Discharge: -20~+60℃
    Pre-wired * Red=Positive,Black=Negative
    Weight/Dimension around 0.3kgs(including cells,pcm.pvc wires) ; φ57*H68mm
    Applications * Apply to light, medical device, etc
    * Replace 12V Nimh battery and 12V lead acid battery with much clear engergy.
    Warnings * 12.6V 6000MAh Li(NiCoMn)O2 Battery should be cut-off at ≥7.5V (2.5V/cell) during
    discharging, and should be stop charging at ≤12.6V(4.2V/cell)during charging.
    * We are not responsible for an damages or losses caused by misuse (included but not
    limited to: Improper charging/discharging, any changes of this battery pack,
    miss-assembling battery packs.)
    * Always pay attention to when charging the battery pack. Battery shall put in a place
    or wrong polarity connection.
    * Please always check battery polarity before connection to device. Never make wrong polarity connection.

Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.