• 10S4P 36V 13.6Ah li-ion battery pack
  • 36V(10S)-44.4V(12S) - 10S4P 36V 13.6Ah li-ion battery pack

10S4P 36V 13.6Ah li-ion battery pack


Model: AY-LP10S4P-18650-3400mAh
Voltage: 36V
Capacity: 13.6Ah
Size (can be customized): L151*W130.5*T52mm
Cell Model: 18650-3400mAh

  • Description
  • Get quote
Sender email add: RE: 10S4P 36V 13.6Ah li-ion battery pack
  • 36V(10S)-44.4V(12S)


    10S4P 36V 13.6Ah Li-ion battery pack 
    Technical Parameters
    Battery pack * 36V 13.6Ah Li(NiCoMn)O2 Battery is made by 40pcs of
    Li(NiCoMn)O2 18650 3400mAh cells
    * In 10S4P configuration
    * Wrap with heavy duty PVC
    Charge Information *Charge voltage: 42V±0.05V (4.2V/cell)
    *Charge method: CC/CV (Constant-current and-Voltage with Limited current)
    *Standard charging time: 2600mA/7 hours, 5A/4hours
    (Battery capacity÷charging current×1.5 )
    *Charge voltage: 42V (4.2V/cell)
    *Charge current: 2.6A
    Dishcharge Information * Maximum discharging current: 15A 
    * Continuous discharge current: 2.6A 
    * Discharge cut-off voltage: 25V (2.5V/cell)
    Protection Information * Protected by one PCM:
    * PCM is installed in the battery pack to balance charging and protect battery
    * Must wait min of 30 minutes afrer battery is fully charged to allow the PCM to perform balance function on all the cells within the pack
    * Maximal continuous charging current: 5A
    * Maximal continuous discharging current: 15A
    * Over-charge& over-discharge detection voltage: 4.25V/3V
    * Over-current detection: 50±10A
    Short-circuit Protection Exterior short circuit Automatic recovery
    Intermal resistance / Cycle life ≤170mΩ / ≥300
    Operating Temperature *Standard Charge: -20~+50℃ / *Standard Discharge: -20~+50℃
    Pre-wired * Red=Positive,Black=Negative
    Weight/Dimension around 2.1kgs(including cells,pcm.pvc wires) ;L151*W130.5*T52mm
    Applications * Apply to light, medical device, etc
    * Replace 36V Nimh battery and 36V lead acid battery with much clear engergy.
    Warnings * 36V 13.6Ah Li(NiCoMn)O2 Battery should be cut-off at ≥25V (2.5V/cell) during
    discharging, and should be stop charging at ≤ 42.5V during charging.
    * We are not responsible for an damages or losses caused by misuse (included but not
    limited to: Improper charging/discharging, any changes of this battery pack,
    miss-assembling battery packs.)
    * Always pay attention to when charging the battery pack. Battery shall put in a place
    or wrong polarity connection.
    * Please always check battery polarity before connection to device. Never make wrong polarity connection.

Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.