PCM-L10S10-C19（LI-10S10A）
Smart Battery Managment with Fuel Guage
| Model: | PCM-L10S10-C19 |
|---|---|
| Working Current: | 10A |
| Size: | L100*W50*T10mm |
| Battery Type: | Li-ion/LiFePO4 |
| Battery Series: | 10S |
| Model: | PCM-L10S10-C19 |
|---|---|
| Working Current: | 10A |
| Size: | L100*W50*T10mm |
| Battery Type: | Li-ion/LiFePO4 |
| Battery Series: | 10S |
| Model: PCM-L10S10-C19（LI-10S10A） ver: A | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Communication Interface | I2C ,Bluetooth | |
| Voltage | Charging voltage | DC：42V CC/CV（4.2v/Cell）10S |
| Capacity | Designing battery capacity（PCM） | 320Ah |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤400uA |
| Maximal continuous charging current | 10A | |
| Maximal continuous discharging current | 10A | |
| Balance current for single cell | 42±10mA | |
|
Over-charge Protection （single cell） |
Balance voltage for single cell | 4.2V ±0.05V |
| Over charge detection voltage | Optional | |
| Over charge detection delay time | 0.5—2S | |
| Over charge release voltage | Optional | |
|
Over discharge protection （single cell） |
Over discharge detection voltage | Optional |
| Over discharge detection delay time | 0.5—2S | |
| Over discharge release voltage | Optional | |
|
Current protection （Battery pack） |
Discharge Over current detection current | Adjustable |
| Detection delay time | 100—800mS | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤50mΩ |
| Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | |
| SIZE:L100*W50*T10mm | ||
| NTC:10KNTC B=3435 Temperature switch：/℃ Weak current switch：/ Activation Method:/ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
