AY-LB10S19A-T006 (10S 20A)
BMS/PCM with Communications
| Model: | AY-LB10S19A-T006 |
|---|---|
| Working Current: | 20A |
| Size: | L90*W35*T7.5 mm |
| Battery Type: | Li-ion/Li-Po/LiFePO4 |
| Battery Series: | 10S |
| Model: | AY-LB10S19A-T006 |
|---|---|
| Working Current: | 20A |
| Size: | L90*W35*T7.5 mm |
| Battery Type: | Li-ion/Li-Po/LiFePO4 |
| Battery Series: | 10S |
| Model: AY-LB10S19A-T006 (LB-10S20A) Ver: A | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Communication Interface | SMBUS | |
| Voltage | Charging voltage | DC: 42V CC/CV（4.2V/Cell）10s |
| Capacity | Designing battery capacity（PCM） | /Ah |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤860uA |
| Low-power operating mode current：Fuel gauge in SLEEP mode. ILOAD < Sleep Current | ≤430 uA | |
| Low-power operating mode current：Fuel gauge in FULLSLEEP mode.ILOAD < Sleep Current | ≤12uA | |
| Maximal continuous charging current | 20A | |
| Maximal continuous discharging current | 20A | |
| Balance current for single cell | 42±10mA | |
|
Over-charge Protection (single cell) |
Balance voltage for single cell | 4.2V±0.05V |
| Over charge detection voltage | 4.30±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.10±0.1V | |
|
Over discharge protection (single cell) |
Over discharge detection voltage | 2.8±0.05V |
| Over discharge detection delay time | 0.5S—2S | |
| Over discharge release voltage | 3.0±0.1V | |
|
Current protection (Battery pack) |
ChargeOver current detection current | 20±3A |
| Detection delay time | 0.5S—2S | |
| Discharge Over current detection current | 850±10A | |
| Detection delay time | 0.5S—2S | |
| Release condition | Cut load, Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤ 30mΩ |
| Temperature | discharge temperature protection | -10~+65℃ |
| charge temperature protection | 0~+60℃ | |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L90*W35*T7.5 mm | ||
| NTC: 10KNTC B=3435 75℃ cut off Temperature switch: / ℃ (the batteries temperature) Weak current switch:/ Activation Method:/ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.