AY-LX3S1.5A-T002 (3S 1.5A)
BMS/PCM with Communications
| Model: | AY-LX3S1.5A-T002 |
|---|---|
| Working Current: | 2A |
| Size: | L127.5*W16*T4 mm |
| Battery Type: | Li-ion/Li-Po/LiFePO4 |
| Battery Series: | 3S |
| Model: | AY-LX3S1.5A-T002 |
|---|---|
| Working Current: | 2A |
| Size: | L127.5*W16*T4 mm |
| Battery Type: | Li-ion/Li-Po/LiFePO4 |
| Battery Series: | 3S |
| Model: AY-LX3S1.5A-T002-LB3S1.5A | Ver: A | |
| Test item (Test at normal temperature 25±2℃) | Criterion | |
| Communication Interface | I2C | |
| Voltage | Charging voltage | DC：12.6V CC/CV（4.2V/Cell）3S |
| Supply Current | Normal operating mode Self consumption current ※ | ≤ 30uA |
| Maximal continuous charging current | 2A | |
| Maximal continuous discharging current | 2A | |
|
Over-charge Protection (single cell) |
Over charge detection voltage ※ | 4.25±0.05V |
| Over charge detection delay time ※ | 0.5S—2S | |
| Over charge release voltage | 4.05±0.1V | |
|
Over discharge protection (single cell) |
Over discharge detection voltage ※ | 2.8±0.05V |
| Over discharge detection delay time ※ | 10—200mS | |
| Over discharge release voltage | 3.0±0.1V | |
|
Current protection (Battery pack) |
Discharge Over current detection current ※ | 15±3A |
| Detection delay time ※ | 5ms—50ms | |
| Release condition | Cut load, Auto Recovery | |
| Short protection | Detection condition ☆ | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤ 30mΩ |
| Temperature | High temperature discharge protection | 70±3℃ |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L127.5*W16*T4 mm | ||
| NTC: / Temperature switch： 70 ℃ (the batteries temperature) Weak current switch：/ Activation Method:/ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.