PCM-L10S10-914（10S）with I2C & HDQ
Smart Battery Managment with Fuel Guage
| Model: | PCM-L10S10-914 |
|---|---|
| Working current: | 12A |
| Size: | L90*W50*T6 mm |
| Balancing: | No |
| Temp. control: | NTC |
| Battery Type: | Li-ion/Li-po |
| Battery Series: | 10S |
| Continuous Current: | 12A |
| Model: | PCM-L10S10-914 |
|---|---|
| Working current: | 12A |
| Size: | L90*W50*T6 mm |
| Balancing: | No |
| Temp. control: | NTC |
| Battery Type: | Li-ion/Li-po |
| Battery Series: | 10S |
| Continuous Current: | 12A |
| No | Test item | Criterion | |
| 1 | Voltage | Charging voltage | DC: 42V CC/CV（4.2V/1cell） |
| Balance voltage for single cell | |||
| 2 | Current | Balance current for single cell | |
| Current consumption for single cell | ≤20μA | ||
| Maximal continuous charging current | 12A | ||
| Maximal continuous discharging current | 12A | ||
| 3 | Over charge Protection（single cell） | Over charge detection voltage | 4.25±0.025V |
| Over charge detection delay time | 0.5S—2S | ||
| Over charge release voltage | 4.05±0.05V | ||
| 4 | Over discharge protection（single cell） | Over discharge detection voltage | 2.5±0.07V |
| Over discharge detection delay time | 10—30mS | ||
| Over discharge release voltage | 3.0±0.1V | ||
| 5 | Over current protection | Over current detection voltage | 0.2±0.015V |
| Over current detection current | 35±5A | ||
| Detection delay time | 5ms—20ms | ||
| Release condition | Cut load | ||
| 6 | Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-500us | ||
| Release condition | Cut load | ||
| 7 | Resistance | Protection circuitry（B- TO P-） | ≤30mΩ |
| 8 | Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | ||
| Over Temperature protection（discharge） | 60±5℃ | ||
| 9 | Dimension | L90*W50*T6mm | |
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
