PCM-L10S10-B70 (10S 20A)
PCM for 10S-16S
| Model: | PCM-L10S10-B70 |
|---|---|
| Working Current: | 20A |
| Size: | L68*W49*T11mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 10S |
| Model: | PCM-L10S10-B70 |
|---|---|
| Working Current: | 20A |
| Size: | L68*W49*T11mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 10S |
| Protection Circuit Module Specifications For 36V（10S）Lithium iron Phosphate Battery Pack | ||||
| Model: PCM-L10S10-B70 (10S 20A) | ||||
| No. | Test Item | Criterion | ||
| 1 | Voltage | Charging voltage | DC: 42V CC/CV | |
| Balance voltage for single cell | 4.20±0.05V | |||
| 2 | Current | Balance current for single cell | 67±10mA | |
| Current consumption for single cell | ≤20μA | |||
| Maximal continuous charging current | 20A | |||
| Maximal continuous Discharging current | 20A | |||
| 3 | Over charge Protection | Over charge detection voltage | 4.25±0.05V | |
| Over charge detection delay time | 0.5—2S | |||
| Over charge release voltage | 4.01±0.1V | |||
| 4 | Over discharge protection | Over discharge detection voltage | 2.50±0.1V | |
| Over discharge detection delay time | 0.2S—1S | |||
| Over discharge release voltage | 3.0±0.1V | |||
| 5 | Over current protection | Over current detection current | 70±10A | |
| Detection delay time | 5ms—60ms | |||
| Release condition | Cut load, Auto Recovery | |||
| 6 | Short protection | Detection condition | Exterior short circuit | |
| Detection delay time | 200-800us | |||
| Release condition | Cut load, Auto Recovery | |||
| 7 | Resistance | Protection circuitry | ≤30mΩ | |
| 8 | Temperature | Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
/PCM-L13S15-E63 (A-1)_litimg.jpg "PCM-L13S15-E63 (A-1)")
