PCM-L13S20-B71(13S20A)
PCM for 10S-16S
Model: | PCM-L13S20-B71 |
---|---|
Working Current: | 20A |
Size: | L65*W35*T11mm |
Battery Type: | Li-ion/Li-Po/LiFePO4 |
Battery Series: | 13S |
Model: | PCM-L13S20-B71 |
---|---|
Working Current: | 20A |
Size: | L65*W35*T11mm |
Battery Type: | Li-ion/Li-Po/LiFePO4 |
Battery Series: | 13S |
Model: PCM-L13S20-B71(LI-ION-13S20A) ver: A | ||
Test item(Test at normal temperature 25±2℃ ) | Criterion | |
Voltage | Charging voltage | DC:54.6V CC/CV(4.2V/Cell)13S |
Supply Current | Normal operating mode current:Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤150uA |
Maximal continuous charging current | 5A | |
Maximal continuous discharging current | 20A | |
Balance current for single cell | / | |
Over-charge Protection (single cell) |
Balance voltage for single cell | / |
Over charge detection voltage | 4.25±0.05V | |
Over charge detection delay time | 0.5S—2S | |
Over charge release voltage | 4.15±0.1V | |
Over discharge protection (single cell) |
Over discharge detection voltage | 2.75±0.05V |
Over discharge detection delay time | 1—3S | |
Over discharge release voltage | 3.0±0.1V | |
Current protection (Battery pack) |
ChargeOver current detection current | / |
Detection delay time | / | |
Discharge Over current detection current | 80±10A | |
Detection delay time | 50-350mS | |
Release condition | Cut load,Auto Recovery | |
Short protection | Detection condition | Exterior short circuit |
Detection delay time | 200-600us | |
Release condition | Cut load | |
Resistance | Main loop electrify resistance | ≤20mΩ |
Temperature | high temperature discharge protection | 65℃ |
Operating Temperature Range | -40~+85℃ | |
Storage Temperature Range | -40~+125℃ | |
SIZE: L65*W35*T11 mm | ||
NTC: / Temperature switch: 65℃ (the batteries temperature) Weak current switch:YES Activation Method:/ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.