PCM-L02S20-265V1 Smart Bms Pcm for Li-ion/Li-po/LiFePO4 Battery
PCM for 1S-2S
| Model: | PCM-L02S20-265V1 |
|---|---|
| Working current: | 20A |
| Size: | L120*W37*T4mm |
| Balancing: | YES |
| Temp. control: | NO |
| Battery Type: | Li-ion/Li-po |
| Battery Series: | 2S |
| Continuous Current: | 20A |
| Model: | PCM-L02S20-265V1 |
|---|---|
| Working current: | 20A |
| Size: | L120*W37*T4mm |
| Balancing: | YES |
| Temp. control: | NO |
| Battery Type: | Li-ion/Li-po |
| Battery Series: | 2S |
| Continuous Current: | 20A |
| Model: PCM-L02S20-265V1 (LI-2S20A) Ver: A | ||
| Test item（Test at normal temperature 25±2℃） | Criterion | |
| Voltage | Charging voltage | DC：8.4V CC/CV（4.2V/Cell）2s |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤30uA |
| Maximal continuous charging current | 20A | |
| Maximal continuous discharging current | 20A | |
| Balance current for single cell | 42±10mA | |
|
Over-charge Protection (single cell) |
Balance voltage for single cell | 4.20±0.05V |
| Over charge detection voltage | 4.25±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.05±0.1V | |
|
Over discharge protection (single cell) |
Over discharge detection voltage | 2.8±0.05V |
| Over discharge detection delay time | 10—200mS | |
| Over discharge release voltage | 3.0±0.1V | |
|
Current protection (Battery pack) |
Discharge Over current detection current | 50±10A |
| Detection delay time | 5ms—20ms | |
| Release condition | Cut load, Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤60mΩ |
| Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L120*W37*T4 mm | ||
| NTC: / Temperature switch：/ Weak current switch：/ special requirement: / | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
