PCM-LX2S2A-AY321 Smart Bms Pcm for Li-ion/Li-po/LiFePO4 Battery
PCM for 1S-2S
| Model: | PCM-LX2S2A-AY321 |
|---|---|
| Working Current: | 2A |
| Size: | L34*W17*T3 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 2S |
| Model: | PCM-LX2S2A-AY321 |
|---|---|
| Working Current: | 2A |
| Size: | L34*W17*T3 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 2S |
| Model: PCM-LX2S2A-AY321 (LI-2S2A) Ver: A | ||
| Test item (Test at normal temperature 25±2℃) | Criterion | |
| Voltage | Charging voltage | DC: 8.4V CC/CV (4.2V/Cell) 2s |
| Supply Current | Normal operating mode current: Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤10uA |
| Maximal continuous charging current | 2A | |
| Maximal continuous discharging current | 2A | |
|
Over-charge Protection (single cell) |
Over charge detection voltage | 4.25±0.05V |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.05±0.1V | |
|
Over discharge protection (single cell) |
Over discharge detection voltage | 2.4±0.05V |
| Over discharge detection delay time | 100—200mS | |
| Over discharge release voltage | 3.0±0.1V | |
|
Current protection (Battery pack) |
ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | 5±2A | |
| Detection delay time | 5ms—20ms | |
| Release condition | Cut load, Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤ 65mΩ |
| Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L34*W17*T3 mm P+/P- 2 contacts on top 12mm diameter "hard gold" | ||
| NTC: / Temperature switch： / Weak current switch：/ Activation Method:/ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
