PCM-L05S100A-AY073 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance
PCM for 5S-9S
| Model: | PCM-L05S100A-AY073 |
|---|---|
| Working Current: | 100A |
| Size: | L120*W60*T12 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 5S |
| Model: | PCM-L05S100A-AY073 |
|---|---|
| Working Current: | 100A |
| Size: | L120*W60*T12 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 5S |
| Model: PCM-L05S100A-AY073-LB5S100A | ver: A | |
| Test item（Test at normal temperature 25±2℃） | Criterion | |
| Voltage | Charging voltage | DC：21V CC/CV（4.2v/Cell）5S |
| Supply Current | Normal operating mode Self consumption current ※ | ≤ 50uA |
| Maximal continuous charging current | 100A | |
| Maximal continuous discharging current | 100A | |
| Balance current for single cell ※ | 42±10mA | |
|
Over-charge Protection (single cell) |
Balance voltage for single cell ※ | 4.2V±0.05V |
| Over charge detection voltage ※ | 4.25±0.05V | |
| Over charge detection delay time ※ | 0.5S—2S | |
| Over charge release voltage | 4.10±0.1V | |
|
Over discharge protection （single cell） |
Over discharge detection voltage ※ | 2.8±0.05V |
| Over discharge detection delay time ※ | 10—200mS | |
| Over discharge release voltage | 3.0±0.1V | |
|
Current protection (Battery pack) |
Discharge Over current detection current ※ | 300±50A |
| Detection delay time ※ | 5ms—50ms | |
| Release condition | Cut load, Auto Recovery | |
| Short protection | Detection condition ☆ | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤ 30mΩ |
| Temperature | high temperature discharge protection | 65±3℃ |
| Operating Temperature Range | -40～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L120*W60*T12 mm | ||
| NTC: / Temperature switch： 65 ℃ (the batteries temperature) Weak current switch：/ Activation Method:/ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
