PCM-L07S12-476V3 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance NTC
PCM for 5S-9S
Model: | PCM-L07S12-476V3 |
---|---|
Working Current: | 12A |
Size: | L123*W34*T5 mm |
Battery Type: | Li-ion/Li-Po |
Battery Series: | 7S |
Model: | PCM-L07S12-476V3 |
---|---|
Working Current: | 12A |
Size: | L123*W34*T5 mm |
Battery Type: | Li-ion/Li-Po |
Battery Series: | 7S |
Model: PCM-L07S12-476V3(LI-7S12A) ver: A | ||
Test item(Test at normal temperature 25±2℃) | Criterion | |
Voltage | Charging voltage | DC:29.4V CC/CV(4.2v/Cell)7s |
Supply Current | Normal operating mode current: Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤50uA |
Maximal continuous charging current | 12A | |
Maximal continuous discharging current | 12A | |
Balance current for single cell | 42±10mA | |
Over-charge Protection (single cell) |
Balance voltage for single cell | 4.18±0.05V |
Over charge detection voltage | 4.25±0.05V | |
Over charge detection delay time | 0.5S—2S | |
Over charge release voltage | 4.15±0.1V | |
Over discharge protection (single cell) |
Over discharge detection voltage | 2.8±0.05V |
Over discharge detection delay time | 0.5S—2S | |
Over discharge release voltage | 3.0±0.1V | |
Current protection (Battery pack) |
ChargeOver current detection current | / |
Detection delay time | / | |
Discharge Over current detection current | 35±5A | |
Detection delay time | 0.5S—2S | |
Release condition | Cut load, Auto Recovery | |
Short protection | Detection condition | Exterior short circuit |
Detection delay time | 200-600us | |
Release condition | Cut load | |
Resistance | Main loop electrify resistance | ≤30mΩ |
Temperature | Operating Temperature Range | -40~+85℃ |
Storage Temperature Range | -40~+125℃ | |
SIZE: L123*W34*T5 mm | ||
NTC: 10K NTC Temperature switch:/ Weak current switch:/ Activation Method:/ |
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.