PCM-L06S07-641 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery
PCM for 5S-9S
| Model: | PCM-L06S07-641 (A-1) |
|---|---|
| Working Current: | 7A |
| Size: | L120*W65*T11 mm |
| Battery Type: | Li-ion |
| Battery Series: | 6S |
_01.jpg "PCM-L06S07-641 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery")
_01-lp.jpg "PCM for 5S-9S - PCM-L06S07-641 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery")
| Model: | PCM-L06S07-641 (A-1) |
|---|---|
| Working Current: | 7A |
| Size: | L120*W65*T11 mm |
| Battery Type: | Li-ion |
| Battery Series: | 6S |
| Protection Circuit Module Specifications For 22.2V（6S）Li-ion Battery Pack | |||
| Model: PCM-L06S07-641（A-1)（6S） | |||
| No. | Test Item | Criterion | |
| 1 | Voltage | Charging voltage | DC:25.2V CC/CV |
| Balance voltage for single cell | |||
| 2 | Current | Balance current for single cell | |
| Current consumption for single cell | ≤20μA | ||
| Maximal continuous charging current | 7A | ||
| Maximal continuous Discharging current | 7A | ||
| 3 | Over charge Protection | Over charge detection voltage | 4.25±0.05V |
| Over charge detection delay time | 0.5S—2S | ||
| Over charge release voltage | 4.05±0.1V | ||
| 4 | Over discharge protection | Over discharge detection voltage | 2.50±0.1V |
| Over discharge detection delay time | 10mS—200mS | ||
| Over discharge release voltage | 2.50±0.1V | ||
| 5 | Over current protection | Over current detection current | 20±3A |
| Detection delay time | 5ms—60ms | ||
| Release condition | Cut load, Auto Recovery | ||
| 6 | Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-800us | ||
| Release condition | Cut load, Auto Recovery | ||
| 7 | Resistance | Protection circuitry | ≤20mΩ |
| 8 | Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
