PCM-L07S6-A27V1 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery
PCM for 5S-9S
| Model: | PCM-L07S6-A27V1 |
|---|---|
| Working Current: | 7A |
| Size: | L123*W17*T3.0 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 7S |
| Model: | PCM-L07S6-A27V1 |
|---|---|
| Working Current: | 7A |
| Size: | L123*W17*T3.0 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 7S |
| Model: PCM-L07S6-A27V1（LI-7S7A） ver: A | ||
| Test item（Test at normal temperature 25±2℃） | Criterion | |
| Voltage | Charging voltage | DC: 29.4V CC/CV（4.2v/Cell）7s |
| Supply Current | Normal operating mode current: Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤20uA |
| Maximal continuous charging current | 7A | |
| Maximal continuous discharging current | 7A | |
| Balance current for single cell | / | |
|
Over-charge Protection (single cell) |
Balance voltage for single cell | / |
| Over charge detection voltage | 4.25±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.05±0.1V | |
|
Over discharge protection （single cell） |
Over discharge detection voltage | 2.8±0.05V |
| Over discharge detection delay time | 10—200mS | |
| Over discharge release voltage | 3.0±0.1V | |
| Current protection (Battery pack) | ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | 15±3A | |
| Detection delay time | 5ms—50ms | |
| Release condition | Cut load, Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤50mΩ |
| Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L123*W17*T3.0 mm | ||
| NTC: / Temperature switch： / Weak current switch：/ Activation Method:/ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
