PCM-L08S12-440(C) Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance
PCM for 5S-9S
| Model: | PCM-L08S12-440(C) |
|---|---|
| Working Current: | 12A |
| Size: | L50*W40*T9 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 8S |
_01.jpg "PCM-L08S12-440(C) Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance")
_01-lp.jpg "PCM for 5S-9S - PCM-L08S12-440(C) Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance")
| Model: | PCM-L08S12-440(C) |
|---|---|
| Working Current: | 12A |
| Size: | L50*W40*T9 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 8S |
| Protection Circuit Module Specifications For 25.6V 8S）Lithium Iron Phosphate Battery Pack | |||
| Model：PCM-L08S12-440(C) (8S) | |||
| No. | Test Item | Criterion | |
| 1 | Voltage | Charging voltage | DC: 28.8V 3.6V/Cell |
| Balance voltage for single cell | 3.60±0.05V | ||
| 2 | Current | Balance current for single cell | 72±10mA |
| Current consumption for single cell | ≤20μA | ||
| Maximal continuous charging current | 12A | ||
| Maximal continuous Discharging current | 12A | ||
| 3 | Over charge Protection | Over charge detection voltage | 3.90±0.05V |
| Over charge detection delay time | 0.5S—2S | ||
| Over charge release voltage | 3.80±0.1V | ||
| 4 | Over discharge protection | Over discharge detection voltage | 2.00±0.1V |
| Over discharge detection delay time | 10mS—200mS | ||
| Over discharge release voltage | 2.30±0.1V | ||
| 5 | Over current protection | Over current detection current | 40±10A |
| Detection delay time | 5ms—60ms | ||
| Release condition | Cut load, Auto Recovery | ||
| 6 | Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-500us | ||
| Release condition | Cut load, Auto Recovery | ||
| 7 | Resistance | Protection circuitry | ≤20mΩ |
| 8 | Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
