PCM-L03C03-D13 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery
PCM for 3S-4S
| Model: | PCM-L03C03-D13 |
|---|---|
| Working Current: | 3A |
| Size: | L18*W18*T3.8 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 3S |
| Model: | PCM-L03C03-D13 |
|---|---|
| Working Current: | 3A |
| Size: | L18*W18*T3.8 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 3S |
| Model: PCM-L03C03-D13 (3S) | ||
| Test item (Test at normal temperature 25±2℃) | Criterion | |
| Voltage | Charging voltage | DC: 12.6V CC/CV（4.2v/Cell）3s |
| Capacity | Designing battery capacity (PCM) | / |
| Supply Current | Normal operating mode current: Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤30uA |
| Maximal continuous charging current | 3A | |
| Maximal continuous discharging current | 3A | |
| Balance current for single cell | / | |
|
Over-charge Protection (single cell) |
Balance voltage for single cell | / |
| Over charge detection voltage | 4.25±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.15±0.1V | |
|
Over discharge protection (single cell) |
Over discharge detection voltage | 2.75±0.1V |
| Over discharge detection delay time | 150—300mS | |
| Over discharge release voltage | 3.0±0.1V | |
|
Current protection (Battery pack) |
ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | 10±2A | |
| Detection delay time | 50ms—150ms | |
| Release condition | Cut load, Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-800us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤30mΩ |
| Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L18*W18*T3.8 mm | ||
| NTC: 10K Temperature switch：/ Weak current switch：/ Activation Method:/ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
