Products Categories

PCM-L03S04-730 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery

Model: PCM-L03S04-730 （LI-3S4A） ver: A
Test item（Test at normal temperature 25±2℃ ）		Criterion
Voltage	Charging voltage	DC：12.6V CC/CV（4.2v/Cell）3s
Supply Current	Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current	≤50uA
	Maximal continuous charging current	4A
	Maximal continuous discharging current	4A
	Balance current for single cell	/
Over-charge Protection （single cell）	Balance voltage for single cell	/
	Over charge detection voltage	4.35±0.05V
	Over charge detection delay time	0.5S—2S
	Over charge release voltage	4.10±0.1V
Over discharge protection （single cell）	Over discharge detection voltage	2.40±0.05V
	Over discharge detection delay time	10—200mS
	Over discharge release voltage	3.0±0.1V
Current protection （Battery pack）	ChargeOver current detection current	/
	Detection delay time	/
	Discharge Over current detection current	10±3A
	Detection delay time	5ms—50ms
	Release condition	Cut load,Auto Recovery
Short protection	Detection condition	Exterior short circuit
	Detection delay time	200-600us
	Release condition	Cut load
Resistance	Main loop electrify resistance	≤20mΩ
Temperature	high temperature charge protection	/
	high temperature discharge protection	/
	Operating Temperature Range	-40～+85℃
	Storage Temperature Range	-40～+125℃
SIZE: L32 W32 T3.5 mm
NTC: / Temperature switch： / (the batteries temperature) Weak current switch：/ Activation Method:/