PCM-LX4S7A-AY304 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with LED indicator
PCM for 3S-4S
Model: | PCM-LX4S7A-AY304 |
---|---|
Working Current: | 7A |
Size: | L95*W15*T14 mm |
Battery Type: | Li-ion/Li-Po |
Battery Series: | 4S |
Model: | PCM-LX4S7A-AY304 |
---|---|
Working Current: | 7A |
Size: | L95*W15*T14 mm |
Battery Type: | Li-ion/Li-Po |
Battery Series: | 4S |
Model: PCM-LX4S7A-AY304(LI 4S7A) | ||
Test item(Test at normal temperature 25±2℃) | Criterion | |
Voltage | Charging voltage | DC: 12.6V CC/CV(4.2v/Cell)3s |
Supply Current | Normal operating mode current | ≤50uA |
Maximal continuous charging current | 7A | |
Maximal continuous discharging current | 7A | |
Balance current for single cell | / | |
Over-charge Protection (single cell) |
Balance voltage for single cell | / |
Over charge detection voltage | 4.25±0.05V | |
Over charge detection delay time | 0.5S—2S | |
Over charge release voltage | 4.15±0.1V | |
Over discharge protection (single cell) |
Over discharge detection voltage | 2.7±0.05V |
Over discharge detection delay time | 10—200mS | |
Over discharge release voltage | 3.0±0.1V | |
Current protection (Battery pack) |
ChargeOver current detection current | / |
Detection delay time | / | |
Discharge Over current detection current | 18±3A | |
Detection delay time | 5ms—20ms | |
Release condition | Cut load, Auto Recovery | |
Short protection | Detection condition | Exterior short circuit |
Detection delay time | 200-600us | |
Release condition | Cut load | |
Resistance | Main loop electrify resistance | ≤100mΩ |
Temperature | Operating Temperature Range | -40~+85℃ |
Storage Temperature Range | -40~+125℃ | |
LED energy Fuel Gauge | <9±0.2V | 0 LED |
9±0.2V-9.9V±0.2V | 1 LED | |
9.9V±0.2V-11.1V±0.2V | 2 LED | |
11.1V±0.2V-12V±0.2V | 3 LED | |
>12V±0.2V | 4 LED | |
SIZE: L95*W15*T14 mm | ||
NTC: / Temperature switch:/ Weak current switch:/ Activation Method:/ |
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.