PCM-LX3S6A-AY326 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with NTC
PCM for 3S-4S
| Model: | PCM-LX3S6A-AY326 |
|---|---|
| Working Current: | 6A |
| Size: | L51.3*W14.8*T3.5 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 3S |
| Model: | PCM-LX3S6A-AY326 |
|---|---|
| Working Current: | 6A |
| Size: | L51.3*W14.8*T3.5 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: | 3S |
| Model: PCM-LX3S6A-AY326 ver: A | ||
| Test item（Test at normal temperature 25±2℃） | Criterion | |
| Voltage | Charging voltage | DC：12.6V CC/CV（4.2v/Cell）3s |
| Supply Current | Normal operating mode current: Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤30uA |
| Maximal continuous charging current | 6A | |
| Maximal continuous discharging current | 6A | |
| Balance current for single cell | / | |
|
Over-charge Protection (single cell) |
Balance voltage for single cell | / |
| Over charge detection voltage | 4.25±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.15±0.1V | |
|
Over discharge protection (single cell) |
Over discharge detection voltage | 2.7±0.05V |
| Over discharge detection delay time | 0.5—1.5S | |
| Over discharge release voltage | 3.0±0.1V | |
|
Current protection (Battery pack) |
ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | 20±5A | |
| Detection delay time | 0.5s—1.5s | |
| Release condition | Cut load, Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-500us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤50mΩ |
| Temperature | high temperature discharge protection | /±5℃ |
| Operating Temperature Range | -20～+85℃ | |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L51.3*W14.8*T3.5 mm | ||
| NTC: 65 ℃ cut off Temperature switch： Weak current switch：/ 特殊激活方式：/ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
