PCM-L04S10-187 Smart BMS PCM for Li-Ion/Li-Po/LiFePO4 Battery with Balance
PCM for 3S-4S
| Model: | PCM-L04S10-187 |
|---|---|
| Working Current: | 12A |
| Size: | L90*W40*T5 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: |
4S |
| Model: | PCM-L04S10-187 |
|---|---|
| Working Current: | 12A |
| Size: | L90*W40*T5 mm |
| Battery Type: | Li-ion/Li-Po |
| Battery Series: |
4S |
| Model: PCM-L04S10-187（LI-4S12A） ver: A | ||
| Test item（Test at normal temperature 25±2℃ ） | Criterion | |
| Voltage | Charging voltage | DC：16.8V CC/CV（4.2v/Cell）4s |
| Supply Current | Normal operating mode current：Fuel gauge in NORMAL mode. ILOAD >Sleep Current | ≤30uA |
| Maximal continuous charging current | 12A | |
| Maximal continuous discharging current | 12A | |
| Balance current for single cell | 42±10mA | |
|
Over-charge Protection （single cell） |
Balance voltage for single cell | 4.2V±0.05V |
| Over charge detection voltage | 4.25±0.05V | |
| Over charge detection delay time | 0.5S—2S | |
| Over charge release voltage | 4.15±0.1V | |
|
Over discharge protection （single cell） |
Over discharge detection voltage | 2.7±0.05V |
| Over discharge detection delay time | 10—200mS | |
| Over discharge release voltage | 3.0±0.1V | |
|
Current protection （Battery pack） |
ChargeOver current detection current | / |
| Detection delay time | / | |
| Discharge Over current detection current | 30±5A | |
| Detection delay time | 5ms—20ms | |
| Release condition | Cut load,Auto Recovery | |
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 200-600us | |
| Release condition | Cut load | |
| Resistance | Main loop electrify resistance | ≤50mΩ |
| Temperature | Operating Temperature Range | -40～+85℃ |
| Storage Temperature Range | -40～+125℃ | |
| SIZE: L90 *W40 *T4.5 mm | ||
| NTC: / Temperature switch： / Weak current switch：/ | ||
Copyright © 2017 AYAA TECHNOLOGY CO.,LTD. All Rights Reserved. Design By Gemelsoft.
